Networking Closet

We have a collection of gently used networking hardware that might be helpful in setting up your network. All were taken from working setups over a period of time and have been tested, but we cannot guarantee that they are perfectly operational. Please work with your local networking contact to decide if any of these items will work for you and if so, get in touch with Nick at uto.tech@stjamestempe.org to find out if the item(s) is still available.

These devices normally act as the gateway between your internet providers modem and your network. They can provide WiFi connectivity to your network. Some may also be usable as WiFi access points.

R6300 Smart WiFi Router AC1750 Dual Band Gigabit

Wireless AC 1750 450Mbps + 1300Mbps Gigabit Wired and Wi-Fi Speed DLNA Ready ReadyShare USB Storage Access Simultaneous Dual Band NETGEAR Genie w/ Airprint More information at the Netgear support page

Gigabit switches will enable you to connect multiple devices to your ethernet. The router / gateway can connect multiple devices, but if you are a distance away from the router you can use these to connect multiple devices at the end of an Ethernet cable.

10/100 Mbit switches serve the same function as the Gigabit switches but only support lower data rates. This is not usually a problem for church networks, even running a Mevo camera.

These items are for audio connectivity. You don’t need them when working with the Mevo camera but they may be useful somewhere else.

Mackie 1604 VLZ3 16-channel Audio Mixer

This 16 channel analog mixer was setup to provide on-stage local mixing but has not been used for a couple of years. Well known brand should be great for up…

Lexicon MPX-100 Dual-Channel Effects Processor

The MPX 100 is a true stereo dual-channel processor with 24-bit internal processing, 20-bit A/D-D/A and S/PDIF digital output for a very affordable price. Utilizing a new version of Lexicon’s…

75ft 7 Channel Audio Snake Cable

This 75 foot long 8-channel snake cable has one damaged XLR connector but provides a long distance connection with up to 7 microphones.

Rolls PB23 Phantom Power Adapter

The PB23 is for powering phantom powered microphones with 48 VDC. This is only required for microphones with active circuitry like condenser type microphones. You can find more information on…